PROMOSOLV™ NEO A1 (PFAS FREE) is a precision cleaning solvent developed by Inventec and supplied by Econtrol Devices. It is specially designed to replace rinsing solvents with a high Health, Safety and Environmental (HSE) impact while complying with current and future environmental regulations. Its very low surface tension enables it to penetrate tight or difficult-to-access spaces, ensuring that cleaning chemistry is fully removed during the cleaning process.
Key Features
PROMOSOLV™ NEO A1 is part of the newly developed PROMOSOLV™ NEO range, offering ultra-low to no Global Warming Potential (GWP) and a low atmospheric lifetime to help reduce environmental impact. The product provides improved solvency power for better and faster cleaning performance while remaining PFAS free, non-flammable, and free from EUH risk phrases. It also has no flash point, making it suitable for applications where safety and environmental compliance are priorities.
Applications
PROMOSOLV™ NEO A1 is designed for precision cleaning and rinsing applications. It can be used in combination with the TOPKLEAN™ range in co-solvent cleaning processes to provide an environmentally friendly degreasing solution without compromising cleaning performance. The solvent is also capable of solubilizing fluorinated oils, silicone oils, and light oils in mono-solvent cleaning processes.
Material Compatibility
The product is compatible with all metals and alloys, including very sensitive materials. It also offers good compatibility with most plastics and elastomers. However, compatibility testing before use is recommended to ensure suitability for specific applications.
Performance Benefits
PROMOSOLV™ NEO A1 delivers several performance advantages, including:
Thermally and chemically stable during use.
Very low surface tension for deep cleaning and rinsing of components with complex geometries.
Increased solvency power for enhanced cleaning performance.
Short cleaning, rinsing, and drying times.
Continuous recycling capability in equipment for longer bath life.
Can be returned for recycling and re-use.
High boiling point helps reduce solvent drag and limit solvent consumption.
Health, Safety & Environmental Benefits
PROMOSOLV™ NEO A1 is classified as a GREENWAY product and is designed to support environmental and safety objectives. The product offers:
PFAS Free formulation.
No Global Warming Potential (GWP).
No Ozone Depletion Potential (ODP).
Non-flammable with no flash point.
Low environmental impact.
Product Specifications
The product has the following specifications:
Appearance: Transparent, colorless
Purity: Greater than 99.5% by weight
Technical Characteristics
PROMOSOLV™ NEO A1 features the following technical properties:
Density: 1.39 g/ml
Boiling Point: 54°C (129°F)
Freezing Point: -82°C (-115°F)
Surface Tension: 17 dynes/cm
KB Value: 44
Vapor Pressure: 32.7 kPa @ 25°C
Water Solubility: 1500 ppm
Relative Evaporation Rate: 64 (ether=100)
Kinematic Viscosity: 0.41 µm²/s @ 25°C
Viscosity: 0.57 mPa·s @ 25°C
Storage & Shelf Life
Store PROMOSOLV™ NEO A1 in its original, closed packaging at room temperature. When stored under the recommended conditions, the product has a minimum shelf life of 5 years from the production date. Packaging availability may vary depending on the manufacturing facility, and users should confirm packaging details with their sales representative.
Recycling & Sustainability
Used PROMOSOLV™ NEO A1 may be returned for recycling where regulations permit through Inventec's ECOPROGRAM. Users are advised to consult the Safety Data Sheet (SDS/MSDS) before use for complete handling and safety guidance.
Technical Support
Inventec provides worldwide technical support to assist customers with product selection, qualification, process setup, and technical issues. Support is available both online and onsite, and customers can also visit Inventec's Cleaning Centers to evaluate cleaning processes and solutions.
About the Supplier
PROMOSOLV™ NEO A1 (PFAS FREE) is manufactured by Inventec and supplied by Econtrol Devices. Inventec develops cleaning, soldering, coating, and cooling materials for electronic, semiconductor, and industrial applications, supporting industries such as automotive, aerospace, semiconductor, energy, and medical.
