Product Name: Vertrel™ XF Specialty Fluid
Brand: Chemours Vertrel™
Manufacturer: The Chemours Company FC, LLC
Distributor: Econtrol Devices
Product Type: Hydrofluorocarbon (HFC) Specialty Cleaning Fluid
Chemical Name: 1,1,1,2,2,3,4,5,5,5-Decafluoropentane
CAS Number: 138495-42-8
SKU: 9711-12

Product Overview

Vertrel™ XF Specialty Fluid is a proprietary hydrofluorocarbon (HFC) cleaning fluid developed by Chemours for precision cleaning, rinsing, drying, and vapor degreasing applications. It is a clear, colorless liquid with zero ozone depletion potential and is suitable for use in vapor degreasing equipment.

Also known as HFC 43-10mee or 2,3-dihydrodecafluoropentane, Vertrel™ XF combines high density, low viscosity, and low surface tension with non-flammability and chemical and thermal stability.

The fluid is used in cleaning and rinsing, particulate removal, lubricant deposition, heat transfer, and dielectric applications. It can replace hydrochlorofluorocarbon (HCFC) and perfluorocarbon (PFC) fluids in most applications.

Vertrel™ XF also serves as the base fluid for several products in the Chemours Vertrel™ range.

Econtrol Devices is an authorized distributor of TMC Industries, supplying Vertrel™ XF Specialty Fluid for professional cleaning and specialty fluid applications.

Key Features and Benefits

• Zero Ozone Depletion Potential: Vertrel™ XF has an ozone depletion potential (ODP) of 0.

• Non-Flammable: Does not become flammable during boiling or evaporation and has no open-cup or closed-cup flash point.

• Low Viscosity: Supports cleaning and removal of fine particulate contamination.

• Low Surface Tension: Suitable for precision cleaning, rinsing, and drying applications.

• High Liquid Density: Combines with low viscosity to support particulate removal during flush cleaning.

• Thermal Stability: Thermally stable up to 300°C (572°F), as stated in the Chemours Technical Data Sheet.

• Chemical Stability: Does not oxidize or degrade during normal storage conditions.

• Recoverable by Distillation: Can be recovered using off-line or in-line distillation equipment.

• Solvent Replacement: Suitable as an alternative to HCFC, PFC, and CFC-113 fluids in many applications.

• VOC-Exempt: HFC 43-10mee is exempt from classification as a volatile organic compound (VOC) by the U.S. EPA.

Applications of Vertrel™ XF Specialty Fluid

Vertrel™ XF is specified for a range of professional cleaning and specialty fluid applications.

1. Precision Cleaning

Used for precision cleaning and removal of fine particulate contamination from metal and nonmetal parts.

2. Cleaning and Rinsing Agent

Suitable for cleaning and rinsing applications, including use in vapor degreasing equipment.

3. Drying Fluid

Used as a drying fluid for specialty cleaning processes.

4. Particulate and Ionic Removal

Used for particulate removal and cleaning processes involving fine contamination.

5. Carrier Fluid for Fluorocarbon Lubricants

Vertrel™ XF has high solubility for Krytox™ and Fomblin fluorocarbon lubricants. It can be used as an application carrier fluid or for cleaning these lubricants.

6. Heat Transfer Fluid

Identified by Chemours for heat transfer media applications.

7. High-Voltage Dielectric Fluid

Used in dielectric fluid applications as specified in the product information.

8. Vapor Degreasing

Suitable for vapor degreasing processes involving cleaning, rinsing, and drying. Chemours recommends modern vapor containment equipment to reduce solvent losses.

Technical Specifications

The following physical properties are provided in the Chemours Vertrel™ XF Technical Data Sheet.

Values are stated at 25°C (77°F) unless otherwise indicated.

Product Composition and Specifications

Material Compatibility

Vertrel™ XF is compatible with a wide range of plastics, elastomers, and metals. The manufacturer recommends testing specific materials before use because compatibility may vary depending on material composition and processing conditions.

Compatible Plastics

• Polyethylene

• Polypropylene

• Polystyrene

• Polyester (PET, PBT)

• Polyphenylene Oxide (PPO)

• Polyimide (PI, PEI, PAI)

• Polyetherketone (PEK)

• Polyaryletherketone (PEEK)

• Polysulfone

• Polyarylsulfone

• Polyphenylene Sulfide (PPS)

• ABS

• Acetal

• Epoxy

• Ionomer

• Liquid Crystal Polymer

• Phenolic

• PVC, CPVC

• PTFE, ETFE

Incompatible Plastics:

• Acrylic

• Cellulosic Materials

Compatible Elastomers

• Buna-N, NBR, Nitrile

• Buna-S, SBR, GRS

• Butyl Rubber, IIR

• Chlorosulfonated PE

• EPM, EPDM, Nordel®

• Polysulfide

• Natural Rubber, Isoprene

• Neoprene

• Urethane

• Silicone

Incompatible Elastomer:

• Viton™

Metal Compatibility

According to Chemours, Vertrel™ XF is compatible with the following metals after two weeks of exposure at 100°C (212°F) in sealed tubes, with and without water contact:

• Zinc*

• Stainless Steel

• Brass*

• Aluminum

• Copper*

Slight discoloration was observed with water present for the marked metals.

Vertrel™ XF is not compatible with strong bases. Contact with highly basic process materials is not recommended.

Environmental Properties

The Chemours Technical Data Sheet lists the following environmental properties.

Vertrel™ XF is accepted by the U.S. Environmental Protection Agency under the Significant New Alternatives Policy (SNAP) program as a substitute for ozone-depleting substances.

The fluid is listed in the TSCA Inventory and is subject to a Significant New Use Rule (SNUR). It should be used only in the indicated applications.

Chemours also states that Vertrel™ XF is not classified as a hazardous air pollutant (HAP) and is not included in the SARA Title III Section 313 list of toxic chemicals.

Available Packaging Sizes

The supplied product listing identifies the following packaging options:

Packaging availability and ordering quantities should be confirmed before purchase.

Storage and Shelf Life

Vertrel™ XF Specialty Fluid is thermally stable and does not oxidize or degrade during normal storage conditions.

According to the Chemours Safety Data Sheet, the product has an indefinite shelf life when stored properly.

Recommended storage and handling practices include:

• Store in a clean, dry area.

• Keep the product in properly labeled containers.

• Protect the fluid from freezing temperatures.

• Avoid direct heat and excessive storage temperatures.

• Follow the manufacturer's recommended storage temperature below 46°C (115°F).

• Use a drum pump for dispensing from larger containers, as recommended in the SDS.

• Follow all applicable safety precautions and handling instructions.

Recovery and Disposal

Vertrel™ XF can be recovered through off-line or in-line distillation equipment, including vapor degreasers and stills.

Chemours recommends monitoring the recovery process because the presence of soil may change the characteristics of the fluid.

Used solvent should be tested for appropriate waste classification before disposal.

The Safety Data Sheet specifies that waste must be disposed of according to local regulations and must not be discharged into sewer systems.

Safety and Handling Information

Vertrel™ XF Specialty Fluid is intended for professional users.

According to the Chemours Safety Data Sheet, the product is not classified as a hazardous substance or mixture under the OSHA Hazard Communication Standard.

However, vapors are heavier than air and may reduce available oxygen in confined spaces. Rapid evaporation may also cause frostbite.

Use the product only with adequate ventilation and follow the recommended personal protective equipment and exposure control measures.

Always read the current Chemours Safety Data Sheet before handling or using Vertrel™ XF.

Buy Vertrel™ XF Specialty Fluid from Econtrol Devices

Econtrol Devices is an authorized distributor of TMC Industries, supplying Vertrel™ XF Specialty Fluid for precision cleaning, rinsing, drying, vapor degreasing, lubricant carrier, heat transfer, and dielectric applications.

Explore the available packaging options or contact Econtrol Devices for product details, technical information, and ordering enquiries.