HT-110 Reclaimed Fluid

Econtrol Devices, an authorized distributor of TMC Industries products, offers HT-110 Reclaimed Fluid, a reclaimed industrial heat transfer fluid supplied by TMC Industries, Inc.

According to the supplied product listing, HT-110 Reclaimed Fluid is a miscible replacement for FC-770 and is also used as a replacement for FC-3283 in some applications.

The product listing compares its physical properties with Galden HT-110, including its boiling point, pour point, density, viscosity, thermal conductivity, and dielectric properties.

HT-110 Reclaimed Fluid is intended for professional and industrial heat transfer applications, as identified in the manufacturer's Safety Data Sheet.

Key Features of HT-110 Reclaimed Fluid

• Reclaimed Heat Transfer Fluid: Offered by TMC Industries for industrial heat transfer applications.

• FC-770 Replacement: Identified as a miscible replacement in the supplied product information.

• FC-3283 Replacement Applications: The product listing states that it is also used to replace FC-3283 in some applications.

• Galden HT-110 Comparison: The supplied product listing provides a physical property comparison with Galden HT-110.

• Boiling Point: 110°C.

• Pour Point: -100°C, as reported in the product comparison table.

• Liquid Density: 1.71 g/cm³.

• Kinematic Viscosity: 0.77 cSt, according to the product listing.

• Thermal Conductivity: 0.065 W/m·K.

• Dielectric Strength: 40 kV, according to the product comparison.

• Non-Combustible Fluid: Identified as non-combustible in the Safety Data Sheet.

• Colorless Liquid: Confirmed in the manufacturer's Safety Data Sheet.

Applications of HT-110 Reclaimed Fluid

1. Industrial Heat Transfer

The manufacturer's Safety Data Sheet identifies HT-110 Reclaimed Fluid for heat transfer applications.

The fluid is restricted to professional and industrial use.

2. FC-770 Replacement

The supplied product listing describes HT-110 Reclaimed Fluid as a miscible replacement for FC-770.

3. FC-3283 Replacement Applications

The product information also identifies HT-110 Reclaimed Fluid as a replacement for FC-3283 in some applications.

Suitability should be evaluated for the specific application because the supplied documents do not establish complete equivalence for every operating condition.

Technical Specifications of HT-110 Reclaimed Fluid

The following values are taken from the supplied product comparison screenshot and the manufacturer's Safety Data Sheet.

The comparison-table figures are taken from the supplied product screenshot, while the SDS values are identified separately. The manufacturer has not supplied a product-specific Technical Data Sheet with guaranteed specifications.

Chemical Identification

According to the manufacturer's Safety Data Sheet (Version 3.0):

The Safety Data Sheet states that the product contains no components subject to disclosure requirements.

It does not provide a detailed percentage-based chemical composition table.

Physical and Thermal Properties

Heat Transfer Properties

HT-110 Reclaimed Fluid has a boiling point of 110°C and a reported liquid density of 1.71 g/cm³.

The product comparison table also reports:

• Thermal Conductivity: 0.065 W/m·K

• Specific Heat: 0.23 cal/g·°C

• Heat of Vaporization: 17 cal/g

• Thermal Expansion: 0.0011 cm³/cm³·°C

Electrical Properties

The product listing provides the following electrical characteristics:

• Dielectric Strength: 40 kV

• Dielectric Constant: 1.92

These values come from the product comparison screenshot. The supplied Safety Data Sheet does not independently confirm the electrical test conditions.

Available Packaging Sizes

The supplied product screenshot lists the following packaging options:

Packaging availability and actual quantities should be confirmed when requesting a quotation.

Storage and Handling

The manufacturer's Safety Data Sheet provides handling and storage guidance for HT-110 Reclaimed Fluid.

Storage Guidelines

• Keep opened containers carefully resealed and upright to prevent leakage.

• Use plastic or glass containers as identified in the Safety Data Sheet.

• Keep away from incompatible materials.

• Avoid flames and extreme heat.

• Follow the manufacturer's applicable storage instructions.

Incompatible Materials

The Safety Data Sheet identifies the following incompatible materials:

• Alkali Metals

• Aluminium

• Magnesium

• Strong Acids

The manufacturer also advises avoiding use near high-voltage electric arcs in the absence of oxygen.

Handling Precautions

• Avoid inhalation of vapors.

• Do not eat, drink, or smoke in the work area.

• Wash exposed skin thoroughly after handling.

• Use appropriate protective clothing where required.

• Use chemical-resistant gloves where necessary.

• Use a face shield or safety glasses with side shields.

• Follow the manufacturer's current Safety Data Sheet for exposure control and personal protective equipment.

Safety Information

According to the manufacturer's Safety Data Sheet, HT-110 Reclaimed Fluid is not classified as hazardous under the OSHA Hazard Communication Standard (29 CFR 1910.1200).

The SDS also identifies the material as non-combustible.

Thermal Stability

The Safety Data Sheet states that HT-110 Reclaimed Fluid is chemically stable under the recommended storage and handling conditions.

It reports a decomposition temperature above 290°C.

High-Temperature Precautions

Exposure to extreme temperatures can cause decomposition.

The Safety Data Sheet identifies the following possible decomposition products during fire conditions:

• Halogenated compounds

• Carbon oxides (CO and CO₂)

Standard industrial handling and fire safety precautions should be followed.

Environmental and Regulatory Information

The manufacturer identifies HT-110 Reclaimed Fluid as a substance restricted to professional and industrial use.

According to the Safety Data Sheet:

• The product is not classified as hazardous under OSHA HCS.

• The product is not classified as dangerous goods under DOT, IATA, and IMDG transport requirements.

• The SDS states that the product does not contain substances known to meet the criteria for PBT or vPvB classification.

The supplied product documents do not provide a verified ozone depletion potential or global warming potential value for HT-110 Reclaimed Fluid.

Recycling and Disposal

HT-110 Reclaimed Fluid may be reclaimed by TMC Industries.

The manufacturer's Safety Data Sheet states that used material may be reclaimed by the manufacturer or disposed of at an approved facility according to local regulations.

Disposal Guidelines

• Contact the manufacturer or supplier for recovery or recycling information.

• Dispose of waste through an approved facility in accordance with local regulations.

• Dispose of packaging containing product residues in the same manner as the product.

• Avoid releasing the fluid into lakes, streams, sewers, or other waterways.

HT-110 Reclaimed Fluid – Authorized Distributor

Econtrol Devices is an authorized distributor of TMC Industries products, including HT-110 Reclaimed Fluid.

For product information, packaging options, technical documentation, and quotations related to HT-110 Reclaimed Fluid, contact Econtrol Devices.

Safety Information: HT-110 Reclaimed Fluid is restricted to professional and industrial use. Review the manufacturer's current Safety Data Sheet and product label before handling, storing, or using the fluid.