TMC-7000 Engineered Fluid

Econtrol Devices, an authorized distributor of TMC Industries products, offers TMC-7000 Engineered Fluid, a clear, colorless, thermally stable dielectric fluid developed for industrial heat transfer applications.

Manufactured by TMC Industries, Inc., TMC-7000 is a miscible, drop-in replacement for 3M™ Novec™ 7000. The fluid contains methyl perfluoropropyl ether and is intended for use in semiconductor manufacturing, electronics, and chemical manufacturing industries.

According to TMC Industries, the fluid supports extreme low-temperature operation down to -120°C. Its thermal and electrical properties make it useful for the heat transfer applications identified in the manufacturer's Technical Data Sheet.

Key Features of TMC-7000 Engineered Fluid

• 3M™ Novec™ 7000 Replacement: Identified by TMC Industries as a miscible, drop-in replacement.

• Dielectric Heat Transfer Fluid: Developed for heat transfer applications in industrial and electronic equipment.

• Low-Temperature Operation: Capable of operation down to -120°C, according to the manufacturer.

• Thermal Stability: Described as thermally stable in the Technical Data Sheet.

• Non-Combustible Fluid: The Safety Data Sheet identifies the material as non-combustible.

• No Flash Point: Reported in the manufacturer's technical and safety documentation.

• Low Kinematic Viscosity: 0.32 cSt.

• Boiling Point: 34°C at 1 atm.

• Dielectric Strength: Greater than 25 kV at a 0.1-inch gap.

• Non-Volatile Residue: Less than 1.0 ppm.

• Zero Ozone Depletion Potential: ODP value of 0.

• Global Warming Potential: GWP value of 530, based on the manufacturer's stated reference.

• Material Compatibility: Compatible with several metals, plastics, and elastomers, subject to application-specific limitations.

Applications of TMC-7000 Engineered Fluid

TMC-7000 is designed for industrial heat transfer and low-temperature applications.

1. Semiconductor Manufacturing

The manufacturer's Technical Data Sheet identifies TMC-7000 for heat transfer applications in semiconductor manufacturing.

2. Electronics Applications

TMC-7000 is listed for electronic applications where a dielectric heat transfer fluid is required.

3. Industrial Heat Transfer

The fluid is used in industrial heat transfer applications, including those identified in the chemical manufacturing industry.

4. Low-Temperature Applications

TMC-7000 is described as capable of operation down to -120°C.

Its Safety Data Sheet also identifies low-temperature immersion baths among its intended uses.

5. Additional Manufacturer-Listed Applications

The Safety Data Sheet lists additional applications, including:

• Refrigerant

• Aerosol Spray Cleaner

• Deposition Coating Solvent

• Vapor Degreasing

• Specialty Foam Blowing Additive

• Line Flushing for Substances Requiring Special Handling

These applications are listed by TMC Industries and are restricted to professional and industrial use.

Technical Specifications of TMC-7000

The following technical values are taken from the manufacturer's Technical Data Sheet.

The values above are manufacturer-reported typical properties. Unless otherwise specified, values are at 25°C and are not intended for specification purposes. The GWP value uses a 100-year integrated time horizon based on IPCC 2013.

Chemical Composition

According to the manufacturer's Safety Data Sheet (Version 4.0), TMC-7000 contains:

TMC Industries identifies TMC-7000 as a substance rather than a mixture.

Material Compatibility

The manufacturer's Technical Data Sheet identifies compatibility with several metals, plastics, and elastomers.

Compatible Metals

• Aluminum

• Copper

• Stainless Steel

• Brass

Compatible Plastics

• Acrylic (PMMA)

• Polyethylene

• Polypropylene

• Polycarbonate

• Polyester

• ABS

• PEEK

• PTFE

Compatible Elastomers

• EPDM

• EPR

• Polyurethane

• Fluorosilicone

• Neoprene

• Nitrile Rubber

Material Compatibility Precautions

TMC Industries notes that compatibility with soft and elastomeric materials depends on the formulation and operating conditions.

TMC-7000 may extract mobile organic compounds, such as plasticizers, from certain polymers. This may cause hardening or shrinking.

The fluid may also be absorbed into some polymers, resulting in swelling, softening, or diffusion through the material.

The manufacturer identifies possible swelling with prolonged exposure to fluorinated plastics and elastomers, including PTFE, FFKM, and FKM types.

Silicone rubber may also experience absorption and swelling. Some surface oxidation of copper was observed during testing.

The manufacturer recommends evaluating material compatibility for each intended application.

Available Packaging Sizes

TMC-7000 Engineered Fluid is listed in the following packaging options:

Packaging availability should be confirmed when requesting a quotation.

Shelf Life and Storage

TMC-7000 has a shelf life of 5 years from the date of manufacture when stored in the original packaging under normal conditions.

According to the manufacturer, TMC Industries may re-certify the fluid every 5 years for up to 20 years.

Storage Guidelines

• Store at normal room temperature.

• Keep away from extreme heat.

• Keep containers closed when not in use.

• Carefully reseal opened containers.

• Keep containers upright to prevent leakage.

• Do not place containers horizontally or upside down.

• Use glass or metal containers as identified in the Safety Data Sheet.

• Keep away from strong acids, strong bases, and strong oxidizing agents.

Safety and Handling Information

According to the manufacturer's Safety Data Sheet, TMC-7000 is not classified as hazardous under the OSHA Hazard Communication Standard (29 CFR 1910.1200).

However, standard handling precautions should still be followed.

Handling Precautions

• Avoid inhalation of vapors.

• Use appropriate protective equipment when required.

• Avoid unnecessary exposure.

• Do not eat, drink, or smoke in the work area.

• Wash exposed skin thoroughly after handling.

• Avoid releasing the fluid into lakes, streams, or sewers.

• Follow the manufacturer's current Safety Data Sheet for detailed safety and exposure-control information.

Industrial Use Restrictions

TMC-7000 is restricted to professional and industrial use.

The manufacturer states that the fluid is not intended for use as a medical device or drug.

Environmental and Regulatory Information

The manufacturer's Technical Data Sheet reports:

The Safety Data Sheet also identifies methyl perfluoropropyl ether as listed on the non-confidential portion of the U.S. TSCA Inventory.

Recycling and Disposal

TMC-7000 Engineered Fluid can be recycled and reused.

TMC Industries provides reclamation services for used fluorinated fluids, as described in its Technical Data Sheet.

Fluid Reclamation

The manufacturer states that reclaimed fluorinated fluids are tested to meet new product specifications.

A Certificate of Analysis is issued with each reclaimed-fluid order.

Disposal Guidelines

• Used fluid may be reclaimed by TMC Industries.

• If disposal is required, use an approved facility according to local regulations.

• Packaging containing product residue must be disposed of in the same manner as the product.

TMC-7000 Engineered Fluid – Authorized Distributor

Econtrol Devices is an authorized distributor of TMC Industries products, including TMC-7000 Engineered Fluid.

For product specifications, packaging options, technical documentation, and quotations related to TMC-7000, contact Econtrol Devices.

Safety Information: TMC-7000 is restricted to professional and industrial use. It is not intended for use as a medical device or drug. Review the manufacturer's current Technical Data Sheet, Safety Data Sheet, and product label before handling or using the fluid.