Home TMC-7500 Engineered Fluid
TMC-7500 Engineered Fluid
TMC-7500 Engineered Fluid
TMC-7500 Engineered Fluid
TMC-7500 Engineered Fluid
TMC-7500 Engineered Fluid
TMC-7500 Engineered Fluid

TMC-7500 Engineered Fluid

★★★★★ 4.8 / 5
×

Product Inquiry

Add to Wishlist Add to Compare

Guaranteed Safe Checkout

Visa
PayPal
Mastercard
American Express

Econtrol Devices, an authorized distributor of TMC Industries products, offers TMC-7500 Engineered Fluid, a clear, colorless, nonflammable liquid intended for industrial cooling and heat transfer applications.
TMC-7500 is a miscible, drop-in replacement for 3M™ Novec™ 7500. The fluid is chemically inert and thermally stable, making it a suitable alternative to perfluorocarbons and perfluoropolyethers in various industrial applications.
TMC-7500 is used for semiconductor cooling, electronic equipment manufacturing, direct-contact cooling, chemical manufacturing, and other heat transfer processes.
Key Features of TMC-7500 Engineered Fluid
•    3M™ Novec™ 7500 Replacement: A miscible, drop-in replacement offering comparable physical properties.
•    Thermal Stability: Designed for industrial heat transfer and cooling applications.
•    Chemically Inert: Listed as chemically inert in the manufacturer's Technical Data Sheet.
•    Nonflammable Fluid: The manufacturer identifies TMC-7500 as nonflammable and reports no flash point.
•    Heat Transfer Applications: Suitable for industrial and electronic cooling processes.
•    Material Compatibility: Compatible with most metals and hard polymers listed by the manufacturer.
•    Zero Ozone Depletion Potential: ODP value of 0.0.
•    Global Warming Potential: Approximately 90.
•    VOC-Exempt Solvent: Listed as a VOC-exempt solvent by the manufacturer under US EPA requirements.
•    RoHS Compliant: Identified as RoHS compliant in the Technical Data Sheet.
•    Recyclable Fluid: Can be recycled and reclaimed by TMC Industries.
Applications of TMC-7500 Engineered Fluid
TMC-7500 is intended for several industrial and electronic cooling applications.
1. Semiconductor Manufacturing and Electronics Cooling
Used as a cooling fluid for semiconductor and electronic device manufacturing processes, testing equipment, and facilities.
2. Industrial Heat Transfer
TMC-7500 is listed for industrial heat transfer applications requiring chemically and thermally stable fluid.
3. Direct-Contact Cooling
The manufacturer lists direct-contact cooling applications involving:
•    Supercomputers
•    High-voltage transformers
•    Power electronics
4. Chemical Manufacturing
TMC-7500 is used as a cooling fluid, special solvent, and process aid in chemical manufacturing.
5. Pharmaceutical Manufacturing Processes
The manufacturer lists TMC-7500 for pharmaceutical manufacturing processes, including cooling and freeze drying.
6. Lubricant Deposition
TMC-7500 is also listed for lubricant deposition applications.
Technical Specifications
Property    TMC-7500 Specification
Product Name    TMC-7500 Engineered Fluid
Manufacturer    TMC Industries
Product Number    7500
CAS Number    297730-93-9
Physical Form    Liquid
Color    Colorless
Boiling Point    128°C
Freeze/Pour Point    -100°C
Average Molecular Weight    414 g/mol
Calculated Critical Temperature    261°C
Latent Heat of Vaporization @ 1 atm    89 J/g
Vapor Pressure    2.1 kPa
Liquid Density    1620 kg/m³
Kinematic Viscosity @ 20°C    0.85 cSt
Absolute Viscosity    1.3 cP
Specific Heat    1128 J/kg-K
Thermal Conductivity    0.065 W/m-K
Surface Tension    16.2 mN/m
Solubility of Fluid in Water    Less than 3 ppmw
Dielectric Strength @ 0.1-inch Gap    Greater than 35 kV
Volume Resistivity    10⁸ Ohm-cm
Dielectric Constant    5.8
Coefficient of Expansion    0.0013 K⁻¹
Ozone Depletion Potential (ODP)    0.0
Global Warming Potential (GWP)    Approximately 90
Flammability    Nonflammable
Flash Point    None
Technical values are taken from the manufacturer's Technical Data Sheet. All values are reported at 25°C unless otherwise specified and are not intended for specification purposes.
Material Compatibility
TMC-7500 is compatible with most metals and hard polymers listed in the manufacturer's Technical Data Sheet.
Compatible Metals
•    Stainless Steel
•    Nickel
•    Copper
•    Aluminum
Compatible Hard Polymers
•    Polycarbonate
•    PMMA
•    ABS
•    Polypropylene
•    Polyethylene
Elastomer Compatibility
The manufacturer lists the following elastomeric materials, with the recommendation to use compounds containing the least amount of extractable plasticizer:
•    EPDM
•    Natural Rubber
•    Polyurethane
Compatibility Note: TMC Industries states that TMC-7500 may absorb into fluorinated plastics and elastomers during prolonged exposure. Material compatibility should be evaluated for the intended application.
Available Packaging Sizes
TMC-7500 Engineered Fluid is listed in the following packaging options:
Packaging Type    Weight    Volume
Jug    12 lb / 5.4 kg    0.9 gal / 3.4 L
Pail    44 lb / 20 kg    3.3 gal / 12.3 L
Drum    551 lb / 250 kg    40.8 gal / 154.3 L
Sample    2.2 lb / 1 kg    0.2 gal / 0.6 L
Tote    Available Upon Request    Available Upon Request
Shelf Life and Storage
TMC-7500 has a shelf life of 5 years from the date of manufacture when stored in its original packaging under normal conditions.
According to TMC Industries, the material can be re-certified every 5 years for up to 20 years.
For proper storage and handling:
•    Keep containers tightly closed.
•    Carefully reseal opened containers and keep them upright to prevent leakage.
•    Use the metal or glass containers specified in the manufacturer's Safety Data Sheet.
•    Keep away from bases and strong oxidizing agents.
•    Avoid heat, sparks, and open flames.
•    Follow the manufacturer's current Safety Data Sheet for handling and storage precautions.
Recycling and Disposal
TMC-7500 Engineered Fluid can be recycled and reused.
TMC Industries offers reclamation services for used fluorinated fluids. According to the manufacturer, reclaimed fluids are restored to like-new condition and tested to meet new product specifications.
A Certificate of Analysis is issued with each reclaimed-fluid order.
Used material may be reclaimed by the manufacturer or disposed of at an approved facility according to applicable local regulations.
TMC-7500 Engineered Fluid – Authorized Distributor
Econtrol Devices is an authorized distributor of TMC Industries products, including TMC-7500 Engineered Fluid.
For product information, technical specifications, available packaging, and quotations related to TMC-7500 Engineered Fluid, contact Econtrol Devices.
Safety Information: TMC-7500 is restricted to professional and industrial use and is not intended for use as a medical device or drug. Review the manufacturer's current Safety Data Sheet and product label before handling or using the fluid.