Methyl Perfluorobutyl Ether PFE-10 – Fluorinated Engineered Fluid

Econtrol Devices offers Methyl Perfluorobutyl Ether PFE-10, a fluorinated engineered fluid manufactured by Zhangzhou Xipu Material Technology Co., Ltd. for industrial electronic cleaning and temperature control applications.

PFE-10 is a liquid containing methyl perfluorobutyl ether and methyl perfluoroisobutyl ether. According to the supplied product listing, PFE-10 is offered as a replacement for 3M™ Novec™ 7100, with similar chemistry and physical properties.

The fluid has a boiling point of 61°C, low viscosity, and dielectric properties documented in the manufacturer's Technical Data Sheet.

The supplied product listing also identifies PFE-10 under the trade names AD-7100, PFE-5100, and TF-7100.

Key Features of PFE-10 Engineered Fluid

• 3M™ Novec™ 7100 Replacement: Identified as a replacement fluid in the supplied product listing.
• Fluorinated Engineered Fluid: Contains two methyl perfluorobutyl ether isomers.
• Colorless Liquid: Identified in the manufacturer's Safety Data Sheet.
• Electronic Cleaning Applications: Listed for electronic cleaning in the Technical Data Sheet.
• Temperature Control Applications: Identified as a temperature control agent.
• Boiling Point: 61°C.
• Pour Point: -135°C.
• Low Viscosity: Kinematic viscosity of 0.38 cSt.
• Dielectric Properties: Dielectric strength greater than 25 kV.
• Zero Ozone Depletion Potential: ODP value of 0.
• No Flash Point: Reported in the manufacturer's Safety Data Sheet.

Applications of PFE-10 Engineered Fluid

PFE-10 is intended for industrial applications, particularly electronic cleaning and temperature control.

1. Electronic Cleaning

The manufacturer's Technical Data Sheet identifies PFE-10 for electronic cleaning applications.

2. Temperature Control Applications

PFE-10 is listed as a temperature control agent.

The supplied product screenshot also identifies heat transfer applications involving semiconductor manufacturing equipment, including:

• Etchers
• Ion Implanters
• Testers

3. Semiconductor Manufacturing

The product listing describes PFE-10 for semiconductor manufacturing processes requiring thermal conductivity applications.

4. Data Center Heat Transfer

The supplied product information lists heat transfer applications involving data centers.

5. High-Performance Computing

PFE-10 is also listed for heat transfer applications involving high-performance computing equipment.

6. Power Electronics

The product screenshot identifies power electronics among the intended heat transfer applications.

7. Aviation Electronics

PFE-10 is listed for thermal management applications involving aviation electronics.

Technical Specifications of PFE-10

The following values are taken from the manufacturer's Technical Data Sheet (Version 2.0).

These are manufacturer-reported technical values and should not be considered guaranteed specifications.

Chemical Composition

According to the manufacturer's Safety Data Sheet (Version 5.0), PFE-10 contains:

Both components are identified in the manufacturer's Technical Data Sheet and Safety Data Sheet.

Physical and Electrical Properties

Temperature Control Properties

PFE-10 has a boiling point of 61°C, pour point of -135°C, and liquid specific heat of 1183 J/kg·K.

These values are reported for the fluid in the manufacturer's Technical Data Sheet.

Electrical Properties

PFE-10 has the following manufacturer-reported electrical properties:

• Dielectric Strength: Greater than 25 kV
• Dielectric Constant at 1 kHz: 7.4
• Volume Resistivity: 10⁸ Ohm·cm

Available Packaging Sizes

The supplied product screenshot lists the following packaging options:

The packaging weights and actual container capacities are also supported by the manufacturer's Technical Data Sheet.

Storage and Handling

PFE-10 is intended for industrial use only.

The manufacturer recommends keeping the fluid in its original container and avoiding incompatible substances.

Storage Guidelines

• Store in a tightly closed original container.
• Keep away from acids.
• Keep away from strong bases.
• Keep away from oxidizing agents.
• Store in a well-ventilated place.
• Follow the manufacturer's Safety Data Sheet and applicable regulations.

Handling Precautions

• Avoid breathing thermal decomposition products.
• Avoid releasing the fluid into the environment.
• Avoid contact with oxidizing agents.
• Do not eat or smoke while handling the product.
• Use appropriate ventilation if extreme overheating may occur.
• Follow the manufacturer's instructions concerning personal protective equipment.

Safety Information

According to the manufacturer's Safety Data Sheet, PFE-10 is not classified as hazardous under the OSHA Hazard Communication Standard, 29 CFR 1910.1200.

The manufacturer reports that PFE-10 is not flammable and has no flash point.

Thermal Decomposition

Under extreme heat or combustion conditions, possible decomposition products include:

• Carbon Monoxide
• Carbon Dioxide
• Hydrogen Fluoride

Industrial Use Restrictions

The Safety Data Sheet specifies that PFE-10 is intended for industrial use only, including specific cleaning and surfactant applications.

The product is not intended for use in medical devices, drugs, or consumer applications.

Environmental and Regulatory Information

The manufacturer reports an ozone depletion potential of 0 for PFE-10.

The Safety Data Sheet also identifies the product's components as compliant with the chemical notification requirements of the U.S. Toxic Substances Control Act (TSCA).

According to the SDS, all required components are listed on the active portion of the TSCA Inventory.

The manufacturer also provides chemical inventory information for Australia, Canada, China, South Korea, Japan, and the Philippines.

Disposal Information

PFE-10 must be disposed of according to applicable local and national regulations.

Disposal Guidelines

• Dispose of waste through a permitted industrial waste facility.
• Follow relevant local and national waste disposal requirements.
• Ensure facilities handling combustion are capable of managing hydrogen fluoride.
• Empty and cleaned product containers may be disposed of as non-hazardous waste where permitted by local regulations.

PFE-10 Engineered Fluid – Product Inquiries at Econtrol Devices

Econtrol Devices provides product information and quotation assistance for Methyl Perfluorobutyl Ether PFE-10.

For technical specifications, packaging information, and quotations related to PFE-10, contact Econtrol Devices.

Safety Information: PFE-10 is intended for industrial use only. Review the manufacturer's current Technical Data Sheet, Safety Data Sheet, and product label before handling, storing, or using the fluid.